MES 5 Liters Clear Gel

SKU: 45-110
Availability: Sold Out

Easy to set up. Comes with detailed user and service manuals or you can contact our technical support team at anytime for additional support over the phone on 03-93316796

MES 5 Liters Clear Gel

For Ultrasound & ECG use
* Ph balanced to neutral
* Non corrosive water soluble
* Allows underwater treatment
* Non staining and non greasy
* Meets all material safety data sheet (MSDS) requirements

MSDS

MATERIAL SAFETY DATA SHEET

Date Of Issue: June 2013 Revision No: 03

IDENTIFICATION

Product Name:   MES Conductive Gel           (Ultrasonic)                         

Manufacturer : TGS Electronics Pty Ltd,   4-5 Ladd Road,   New Gisborne,  Victoria, 3438

Distributor: Medical Equipment Services Pty Ltd, 12 / 37 Keilor Park Drive, Keilor Park,  Victoria, 3042

Other Names:

UN Number:Not Applicable                                                  

Hazchem Code:Not Applicable

Dangerous: Not Applicable

Goods Class: Not Applicable

Packaging Group: Not Applicable

Subsidiary Risk: Not Applicable

Emergency Procedure Guide: Not Applicable

Poisons Schedule: Not Applicable

Use: Ultrasonic Gel

NON HAZARDOUS ACCORDING TO WORKSAFE AUSTRALIA

Physical Description/Properties:

Appearance: Clear, thick, water white gel with little aeration

Boiling Point (°C): Not known                                                 Flash Point (°C):Non-flammable

Melting Point (°C):Not known                                                 Flammability Limits                

Specific Gravity: 0.990 – 1.000                                              Lower Limit (%):Not Applicable

Solubility in Water: Soluble                                                     Upper Limit (%):Not Applicable

Vapour Pressure (kPa):Not known                                         Autoignition Temperature(°C): N/A

Vapour Density  (Air=1):Not kn own                                      pH (100%): 5.6 – 6.5

Percent Volatile (%): Not known                                           pH (1% Solution): Not applicable

Ingredients:

Chemical

CAS No.

Proportion

 

 

% w/w

Water (Aqua)

7732-18-5

99.05

Carbomer

9003-01-4

0.55

Imidazolidinyl Urea

39236-46-9

0.1

Tetrasodium EDTA

64-02-8

0.05

Benzophenone-4

4065-45-6

0.05

 Sodium Hydroxide                       1310-73-2                                 0.2

HEALTH HAZARD INFORMATION

Health Effects:

Acute:

Ingested or swallowed: Product may induce nausea.  

If ingested or swallowed seek medical advice.

Eye: May irritate the eyes if they come into contact with product.

Skin:   May be applied safely to skin.

Inhaled: Product if used as directed is unlikely to be inhaled.  If inhaled seek medical advice.

Chronic:   No long term effects known.

First Aid:

Ingested or swallowed: If ingested or swallowed seek medical advice.

Eye: Flush with saline solution or water for 20 minutes.   Seek medical advice.

Skin: If an irritation or rash develops discontinue use.

Inhaled: Seek medical advice.

First Aid Facilities: Saline Eye solution or eye-wash station.

Advice To Doctor:   Treat symptomatically.

PRECAUTIONS FOR USE

Exposure Standards: Product is not classified as a hazardous material.  No exposure limits have been set.

Engineering Controls: None

Personal Protection Equipment (PPE):

Eye: None

Skin: None

Respiratory System: None

Other: None

Flammability: Non-Flammable

Reactivity: Non-Reactive

SAFE HANDLING INFORMATION

Storage: Product is not classified as a dangerous good, therefore no special storage is required.   Keep stored below 30°C.

Transport: Product is not classified as a dangerous good, therefore no special transport conditions apply.

Regulatory Information: None

Spills:

General: Product is non-hazardous, may be washed away with water.

Small Spills: Remove to suitable waste receptacle.

Large Spills: Contain and absorb with suitable absorbent e.g. soil, sand prior to disposal.

Disposal:   Contact local environmental authority.

Fire/Explosion Hazard: None

Scroll To Top